Detailed Process for Checking and Replacing Car Coolant

Car coolant is one of the essential components that helps your vehicle operate smoothly and durably. Therefore, regularly changing your car's coolant is something you should do to ensure your vehicle is optimally protected. Depending on the type of coolant you use, it is generally recommended to replace it every 40,000 - 60,000 kilometers (or every 2 - 3 years).

In this article, Huynh Chau will guide you through the steps of checking and replacing car coolant in the most detailed manner. Let’s dive in!

Related Articles:

• Is coolant important for cars?
• What is cylinder erosion in vehicles?
• AMSOIL coolant is recommended for vehicles.

Procedure for checking and replacing car coolant

1. When to Check Car Coolant

To answer the question: When should you change car coolant? As mentioned earlier, depending on the type of coolant, you should have your vehicle checked and replace the coolant approximately every 40,000 - 60,000 kilometers (or about every 2 - 3 years).

However, if you frequently drive under harsh conditions, you should consider replacing the coolant sooner than usual. Regularly check your vehicle's coolant reservoir and monitor the vehicle's condition to replace the coolant at the most appropriate time.

2. Car Coolant Replacement Procedure

To accurately replace the coolant in your vehicle, here is the most detailed coolant replacement procedure compiled by Huynh Chau, consisting of 9 specific steps:

Step 1: Preparation

To make it easier to replace your car's coolant, the tools you need for the process are very important. Some items you need to replace the coolant are:

• - 1 clean water container (with a capacity equal to 1/2 of the cooling system's capacity)
  - 1 coolant appropriate for your vehicle
  - 1 flat-head screwdriver to remove screws
  - A funnel for pouring coolant
  - 1 basin for collecting old coolant
  - A flashlight and a pair of gloves
• Before proceeding with the next steps, ensure that your vehicle’s engine is completely cool. Ideally, after driving, let the vehicle rest for 1 to 1.5 hours before starting the coolant replacement process.
• Step 2: Locate the Coolant Reservoir
• Once you have prepared the necessary tools, if you are not a professional mechanic, locate your vehicle's coolant reservoir. You can refer to the vehicle's manual or look it up online to find the exact position of the reservoir.
• Step 3: Open the Reservoir Cap
• After you’ve identified the coolant reservoir, proceed to open the